7532 Radar Tank Gauge
The 7532 Radar Tank Gauge (RTG), with an accuracy rate of ±0.5 mm and ideally suited for custody transfer applications, is used for continuous, non-contact level measurement in bulk liquid storage tanks. The 7532 RTG with planar antenna is specifically suited for stilling well applications with ranges up to 38 m (124 ft). The emitted circular mode radar pattern is a must for high accuracy applications on stilling wells.
- Related Products
Accuracy Approved for Custody Transfer
7532 RTG uses C (6 GHz) band microwaves to measure liquids to an accuracy of ±0.5mm (0.02″) This gauge is NMI and PTB approved for use in custody transfer tank gauging systems.
Touch Screen Operations
Easy onsite operation using built-in touch control display without having to open the enclosure. A remote display is also available so that you can read and operate the gauge from the tank side.
Low Cost Wiring
Intrinsically safe 4-wire technology reduces on-tank wiring costs and allows easy implementation into existing systems.
Each radar gauge is approved for use in explosion hazardous areas to ATEX, FM and CSA standards.
- Cost‐effective intrinsically safe — 4‐wire cable for HART and 24 VDC i.s. power.
- Easy on‐site operation using built‐in display.
- Easy commissioning and diagnostics using Windows® based software.
- Inventory control version with available (±3 mm) accuracy.
- National approvals (MNi, PTB) for custody transfer.
6.5 kg (14.4 lbs) + weight of flange
Max. 330 mW at 16 V, max. 500 mW at 24 V, max. 600 mW at 30 V.
Max. 21 mA (50 mA inrush current).
IP 65, NEMA 4X (IP20, NEMA 1 with open housing and removed liquid crystal display) Housing T12: separate terminal compartment for increased safety respectively explosion proof. Material: aluminium, seawater repellent, chromate, powder coated Sight window: glass
IP 68 (NEMA 6P)
Antenna IP 68 (NEMA 6P) Conduit entries
M20x1.5; Pg 13.5 (gland included); ¾ NPT; G ¾ internal thread
‐40 °F and +185 °F (‐40 °C and +85 °C)
RF approvals ‐ R&TTE, FCC
Marine certificate ‐ GL (Germanisch Lloyd), ABS, NK
Factory Mutual ‐ IS Class I,II,III, Div 1 Groups A‐G T*
Class 1, Zone 0, AEx ia IIC T*
DIP Class II,III, Div 1 Groups E,F,G T*
NI Class I, Div 2 Groups A‐D T*
XP‐IS Class 1, Div. 1 Groups A‐D T*
XP Class 1, Zone 0, IIC T*
Antenna Class 1, Zone 0, AEx ia IIC T*
CSA ‐ ExnC IIC Class 1 Zone 2, Exd [ia] IIC Zone 1/0, Ex ia IIC Class 1 Zone 0
See specifications document for more information.
Approvals & Certifications
Contact Varec for ATEX or IECEx approved devices
Various DN Sizes and Material Types
DN, RF & UNI‐flange
High Accuracy, Inventory Control or NMI/PTB Approved
Contact Varec for more information.
Parts and Accesories