SupportNET Knowledge Base KBA204

‘Last Full Day Tank Change’ report does not display the correct data

The information in this article applies to:

·         FuelsManager Oil & Gas Version 4.3, 6.0 and 7.0.

 

 

 

Summary

The historical report named ‘Last Full Day Tank Change Report’ does not display the correct data. This was due to an error in the creation of the report.

 

More Information

The above report will display the tank data change grouped by product for the previous day. The report will get the data at midnight of the previous day and get the last data entry for the tank found in the archive for the previous day. The changes between the first and last record will then be calculated and displayed on the report.

 

File Information

This issue has been addressed by the hot fix files detailed below:

 

Name                                 

05) Last Full Day Tank Change Report.rpt

 

Instructions to a Apply the Hot Fix

1.       Copy the above file to the FuelsManager project historical reports folder (default location is c:\Program Files\FuelsManager\FMProject\Reports\Historical)

 

For more information please visit us online at: www.varec.com

 

Supplementary Information

  • None
  •  

Keywords

·         Last Day tank change report; Historical report is incorrect

 

Varec Incident Numbers

·         CSI#2576

 

Date Created

5/24/06

 

Last Modified

5/32/06

 

Knowledge Base Document

KBA204GVAE0506