SupportNET Knowledge Base KBA197

Water Table Calculations are Incorrect for Combined Water Table

The information in this article applies to:

· FuelsManager Oil & Gas Version 7.0 SP1.

Summary

When using the combined water table option, the strap volume is not compensated for the available volume in the water table.

More Information

If the water volume is less then the maximum reading in the water table, the strap volume should reflect the available volume left in the water table. If the water level is greater then the water table then the water volume should reflect the additional volume from the strap table.

File Information

This issue has been addressed by the hot fix files detailed below:

Name Version

FMDataManager.exe 7.0.1.10

VolumeCorrection.dll 7.0.1.21

Instructions to a Apply the Hot Fix

1. Shutdown the fmsystemmanager service

2. Copy FMDataManager.exe file to the FuelsManager application folder (default location is c:\Program Files\FuelsManager)

3. Copy Volumecorrection.dll and tlb  files to the FuelsManager shared folder (default location is c:\Program Files\common files\fuelsmanager shared)

4. Restart the fmsystemmanager service

For more information please visit us online at: www.varec.com

Supplementary Information

· None

Keywords

· Water Volume; Strap Volume; Combined Water Table Mode

Varec Incident Numbers

· CSI#2489

Date Created

5/2/2006

Last Modified

5/02/06

Knowledge Base Document

KBA197GVAE0506